Buy Bulk Cement Truck SF3U28

Bulk Cement Trucks
- SF3U34
- SF3U32
- SF3U30
- SF2U14
- SF3U24
- SF2U25
- SF3U28
  - SF3U28.1S_01, 28 m3, fifth-wheel 1250, 1 compartment
- SF3U27
- SF3U25
- SF2U18
- SF4U32
- SF4U32
- SF4U31
- SF3U30
- SF3U31

The volume of 28 m3, the possibility to use from one to three compartments and the payload of almost 30000 kg – these are the features that favourably distinguish the cement truck semi-trailer 964816 and cement trucks model 964824 from a number of competitors. Those who are going to buy this cement truck should know that it is made of special aluminum alloy, and thus is perfectly suitable for transportation of loose and bulk cargo.

Of course, the organizations and sole proprietors who decided to buy cement truck 964816 won’t lose using it for intended purpose - for cement transportation. This model of cement trucks is a good investment. Sespel offers a wide range of cement trucks at the most favorable prices.

Order Lease

Technologies

SESPEL AXLES

Compressor unit КС-400

Specifications

Rated capacity, l	28000
Compartments	1
Total length, mm	8900
Height, mm	4000
Width, mm	2550
Wheel Base, mm	4435+1360+1360
Axle configuration of the tractor	4x2
The distance between axes, mm	1360
Wheels	385/65R22,5; 6+1
Total gross weight, kg	37100
Vertical load on the fifth wheel, kg	10300
Axle load, kg	27000
Payload, kg	30600
Curb weight, kg	6500
More Vessel Chassis Equipment Unloading Tank semitrailer with pnematic discharge working under pressure. The supporting tank structure is made of aluminium alloy (Germany) as unibody. It is intended for transportation of dry bulk goods: cement, quartz sand, clay, etc. transported by Russian or foreign trucks with 4х2 wheel arrangement; number of Manholes – 2; number of cones – 2; number of isolated compartments – 1 (the vessel can be separated by internal baffles to 5 (five) hermetic compartments to transport different kinds of load with individual discharge); Pneumatic discharge system with aerating fabric FLUITEX E800/5 (Germany) in each cone; Top loading through Manlids; Pneumatic discharge DN100 to the left or right side in the direction of travel (also possible to the rear end); Material: steel alloy 09Г2С, walls and bottoms thickness - minimum 4,00 mm; shell thickness - minimum 4 mm, cone thickness (3pcs) - minimum 4 mm, design pressure – 2,0 bar, test pressure – 3,4 bar, working pressure – 1,5 bar, The semitrailer vessel is manufactured in full concordance with «Rules for construction and safety operation of pressure vessels» acc.to ПБ 03-576-03 and technical specifications for production 4526-001-38990270-2002; Running gear - Brake system 3 х 9000 kg, EcoPlus (Heavy Duty) BPW, strengthened for heavy road conditions; Maximum load on axle – 9.0 tons Drum brakes; Level control valve; Double circuit brake system WABCO equipped with ТEBS–E + smart board (2S/2M) with Electronic Stability Control (ESC) function for difficult road conditions; Automatic regulation of brake force and automatic brake shoes gap control; Pneumatic hand brake - of two axles; One test jack for each wheel – to measure and check pressure in braking system; The pressure in the braking system is automatically adjusted according to the load; Wheels and Tyres Solid wheels, tubeless tires (6 wheels + 1 spare) - 7 pcs; Tyres 385/65 R22,5 - 7 pcs; Steel wheel disks 11,75x22,5 - 7 pcs; Individual PVC fenders with brackets and mudguard - 6 pcs; Tank equipment Kingpin 2'' in diameter of international type made of forged steel fixed on a steel support plate; BPW support legs with double speed, 25 (50) tons load capacity, hand-driven; Aluminium manlid DN450 on each compartment. It is structurally possible to open the manlid by tilting or sliding in a horizontal plane. Bolting at 4 (four) points; Air supply and distribution line with outlets to each compartment and discharge pipeline; Ball valves with hand control DN40 (2”) on airline to control the air supply to tank and pipeline – 7 pcs.; Check relief valve for each compartment; Vibration-proof manometer to control the air supply; Excess pressure relief valve; Non-return butterfly valve on airline; External air supply access point on kingpin plate; Composite reinforced discharge hose L = 5,0m DN-100 (4") - 1 pce; Double carrier for PVC discharge hoses - 2 pcs; Quick connectors Сamloсk 4” on discharge hoses; Mounting area for compressor unit with maximum weight 700 kg above the kingpin plate; Rear protection according to GOST R 50913-96 requirements; Other equipment A box for personal items on support bracket; Wheel blocks with brackets -2 pcs; Spare wheel mounting bracket with hand winch Haacon for load lifting; Discharge collector is located above the axle level on the left side of the vessel between supporting legs and the carriage front axle; Steel pipeline 4” for bottom discharge united into collector – 2 pcs; Air Valve 4” for each compartment on the discharge pipeline; Aluminium module for air valves control with compartment numbers and switch positions marking: open/closed for each compartment in a safety aluminium box - 1 pce; Air preparation unit for air valves drive;

Engineer consultation

Our engineers will help you calculate the optimal load on the road according to the RF Government Regulation No. 12 dated 01.05.2015 for your cargo and your tractor for operation without overloading and fines.

Select one of the standard configurations.

Or contact our specialists and choose your own configuration.

SF3U28.1S_01, 28 m3, fifth-wheel 1250, 1 compartment

Order

If you have an individual project, please, fill out the data input form and send it to us for calculation.

Download the questionnaire

Specifications

Engineer consultation