Buy Bitumen Tanker SF3B23

Bitumen Tankers

Transportation of petroleum products requires compliance with standards for carriage of dangerous goods. Using special tanks SF3B23 for petroleum products produced by Sespel, presented in this section of the catalog, will allow you to store for a long time and transport bitumen heated to high temperatures (over 200 degrees). The bitumen tankers SF3B23 for transportation of petroleum products chassis and other brands are manufactured in accordance with the declared international quality standards. The total mass of the vehicle is 30,000 kg. The load on the fifth-wheel is 5600 kg. The load on axles is 20,500 kg. The loading capacity is 23000 kg. The curb weight of the vehicle is 7000 kg.

It is possible to purchase new tanks made of high heat resistance steel for your own purposes in a short time at Sespel. This product made of low-alloy steel will serve you to transport bitumen for a long time.

Order Lease Bitumen Tankers in stock

Technologies

SESPEL AXLES

Specifications

Bitumen Tankers - технические характеристики

Rated capacity, l	23000
Total length, mm	9730
Height, mm	3600
Width, mm	2550
Wheel Base, mm	4350+1360+1360
The distance between axes, mm	1360
Wheels	385/65R22,5; 6+1
Total gross weight, kg	30000
Vertical load on the fifth wheel, kg	5600
Axle load, kg	20500
Payload, kg	23000
Curb weight, kg	7000
More Vessel Chassis Equipment Unloading Color The self-supporting tank structure made of low-alloy steel or stainless steel is intended for carriage and temporary storage of dark oil products (heated bitumen, resinous oil, fuel oil and etc.). It is transported by Russian or foreign trucks with 4x2 wheel arrangement; The tank body is made of low-alloy steel and is covered with thermal insulation (additional option) 150 mm, as well as a sheet of galvanized steel 0.8 mm thick or stainless steel 0.8 mm thick; Model: round shape, with lowered center of gravity; The operating temperature of the bitumen transported in the tank is about 250° C; The gravity discharge through a bottom valve and a gate valve DN100 (4"); Material: Steel 09Г2С, the thickness of a shell and bottoms is minimum 4,00 mm; The tank has 1 compartment with baffles. The compartment has a neck ring and a manhole with an appropriate lid and bottom gasket; It is structurally possible to fill the tank to 85% of its nominal volume (one measuring corner is installed inside the tank at the level of the nominal volume, the second one is installed on 95% of the nominal volume of the tank); Design pressure - 2.0 bar, Test pressure - 0.5 bar, Working pressure - 1.0 bar Running gear - Brake system 3 (three) axle air suspension BPW (Germany), unlimited mileage warranty for 3 (three) years (the warranty is provided by BPW); Maximum load on axle – 9.0 tons Steel chassis; Drum brakes; Level control valve; Double circuit brake system WABCO equipped with ТEBS system (2S/2M) with Roll Stability Support function. Automatic regulation of brake force and automatic brake shoes gap control; Pneumatic hand brake – of two axles; One test jack for each wheel – to measure and check pressure in braking system. The pressure in the braking system is automatically adjusted according to the load; Wheels and Tyres Solid wheels, tubeless tyres (6 wheels + 1 spare) - 7 pcs; Tyres 385/65 R22,5 - 7 pcs; Steel wheel disks 11,75x22,5 - 7 pcs; Aluminum fenders with brackets and mudguard - 2 pcs; Tank equipment Kingpin 2'' in diameter of international type of KZ brand with steel support plate; Double speed BPW supporting legs, 24 (50) tons load capacity, hand-driven; Manhole DN500 with a hinged lid and a gasket; Vent Valve on top of the tank for air intake and outlet -1 pce; Manhole safety fencing with a protective box; Ecological anti spill and draining equipment, 1 outlet at the tank manhole – draining system passing through it; Aluminum box of closed type for laying the discharge hose on top, on the right side, 4200 mm long - 1pce; Composite discharge hose L = 4,0 m., DN-100 (4” ) - 1 pce; Rear protection according to GOST R 50913-96 requirements; 2-rail side bumpers; Thermometer from 0° to + 300°C - 1 pce. Other equipment Fire extinguisher of 6 kg capacity with plastic box - 2 pcs.; Wheel blocks with brackets -2 pcs.; Box for nuetralizing agent (sand) -1 pce; Spare wheel mounting bracket on the right side in the center of the tank; The discharging equipment is situated in the rear side of the tank; Steel pipeline 4” for gravity discharge - 1 pce; Ball Valve with manual control DN100 (4”) heat-resistant on discharge pipeline - 1 pce. BottomValve for dark oil products 4" with manual control, steering wheel, on the right side -1 pce. Connection with plug Camlock 4" on the draining device; Discharge opportunities: discharging under gravity; Robotic painting; Tank painting - special treatment with zinc-enriched pre-coating and painting in one color with high-quality two-pack paint, flash drying (in compliance with the requirements of the Regulations concerning the carriage of dangerous goods); The colour of frame, consoles, supporting legs - orange; The tank colour - mirror-like; The color of outer bottoms - orange;

Engineer consultation

Our engineers will help you calculate the optimal load on the road according to the RF Government Regulation No. 12 dated 01.05.2015 for your cargo and your tractor for operation without overloading and fines.

Select one of the standard configurations.

Or contact our specialists and choose your own configuration.

964879, 1 compartment, fifth-wheel 1250	Are available Order 964879, 1 compartment, fifth-wheel 1250
SF3B23.1S_02, 23 m3, 1 compartment, fifth-wheel 1250	Order SF3B23.1S_02, 23 m3, 1 compartment, fifth-wheel 1250
SF3B23.1S_01, 23 m3, 1 compartment, fifth-wheel 1350 SF3B23.1S_01, 23 m3, 1 compartment, fifth-wheel 1350 is made of low-alloy steel. The total capacity is 23 m3 with division into 1 compartment. Three-axle single-wheeled air suspension manufactured by BPW (Germany), the warranty is provided by BPW for up to 3 years. The total mass of the semitrailer is 33000 kg. Double circuit brake system WABCO, equipped with TEBS (2S / 2M) with Roll Stability Support function. In off-road version the semitrailer is equipped with aluminum fenders. The fifth-wheel height is from 1250 to 1350 mm.	Order SF3B23.1S_01, 23 m3, 1 compartment, fifth-wheel 1350 The Bitumen Tanker SF3B23.1S_01, 23 m3, 1 compartment, fifth-wheel 1350 is a very specialized tank truck in off-road version that is designed for transportation and temporary storage of bitumen, fuel oil, crude oil, as well as some other substances heated up to 200 degrees temperature.The tank structure is made from low-alloy steel.The tank volume is 23 m3. The Bitumen Tanker is divided into 1 compartment. The total length of the vehicle 10000 mm. Height - 3550 mm. Width - 2550 mm. Wheel base - 4350+1360+1360 mm. Payload - 25900 kg. It is transported by Russian or foreign tractor with 6х6 wheel arrangement. The Bitumen Tanker SF3B23.1S_01 is intended for operation with MAZ-6425Х9-450-051, KAMAZ- 53504-46. The running gear of the semi-trailer is a three-axle single-wheeled air or leaf suspension (according to customer preferences) manufactured by BPW (Germany), the warranty is provided by BPW for up to 3 years. Double circuit brake system WABCO, equipped with TEBS (2S / 2M) with Roll Stability Support function. In off-road version the semi-trailer is equipped with aluminum fenders. The tank undergoes special treatment with zinc-enriched pre-coating and painting in one color with high-quality two-pack paint. The fifth-wheel height is from 1250 to 1350 mm.

If you have an individual project, please, fill out the data input form and send it to us for calculation.

Download the questionnaire

Specifications

Engineer consultation