SF3B30

In 2014, Sespel plant produced oil tanks of SF3B30 model with 30 m3 capacity. The tanks are intended for transportation and temporary storage of dark oil products. The density of substances can reach 1 t / m3, and the temperature when pouring into the tank - up to 200 degrees. Themachinery is used more often to transport fuel oil, resinous oils, hot bitumen.

Tanks for oil transportation are made of low-alloy steel, covered with an insulating layer and stainless steel. The bitumen tanker dimensions are 9.05x3.8x2.5 m, thanks to which, besides its huge capacity, it is characterized by good cross-country ability on roads. The carrying capacity of SF3B30 is 30,000 kg, and the total weight is 37.4 tons. Also, the plant has tanks for diesel fuel with 25,000 liters capacity.

Oil tanks: design features

The trailer is transported by a tractor with 6x4 wheel formula. Ladders and service platformsmake the machinery convenient and safe in operation. The oil tank is equipped with a functional filler neck and durable shut-off valves.

Cheboksary machinery from Sespel plant can be ordered by phone or online. The trailers are fitted with European or domestic components according to individual requests.

You can buy SF3B30 oil tank not only in Cheboksary, but also in the dealers office of the company. They are located in large cities: Kazan, St. Petersburg, Chelyabinsk, Nizhny Novgorod, Yekaterinburg, Rostov-on-Don, etc. On page Contacts you can specify all our addresses and request prices for bitumen tankers from our managers.

Order Lease

Technologies

SESPEL AXLES

Specifications

Rated capacity, l	30000
Compartments	1
Total length, mm	9050
Height, mm	3770
Width, mm	2500
Wheel Base, mm	4190+1360+1360
The distance between axes, mm	1360
Wheels	385/65R22,5; 6+1
Total gross weight, kg	37400
Vertical load on the fifth wheel, kg	14800
Axle load, kg	22600
Payload, kg	30000
Curb weight, kg	7381
More Vessel Chassis Equipment Unloading Color The self-supporting tank structure made of low-alloy steel or stainless steel is intended for carriage and temporary storage of dark oil products (heated bitumen, resinous oil, fuel oil and etc.). It is transported by Russian or foreign trucks with 6х4 wheel arrangement; The tank body is made of low-alloy steel and is covered with thermal insulation (additional option) 150 mm, as well as a sheet of galvanized steel 0.8 mm thick or stainless steel 0.8 mm thick; Model: round shape, with lowered center of gravity; The operating temperature of the bitumen transported in the tank is about 250° C; The gravity discharge through a bottom valve and a gate valve DN100 (4"); Material: Steel 09Г2С, the thickness of a shell and bottoms is minimum 4,00 mm; The tank has 1 compartment with baffles. The compartment has a neck ring and a manhole with an appropriate lid and bottom gasket; It is structurally possible to fill the tank to 85% of its nominal volume (one measuring corner is installed inside the tank at the level of the nominal volume, the second one is installed on 95% of the nominal volume of the tank); Running gear - Brake system 3 (three) axle air suspension BPW (Germany), unlimited mileage warranty for 3 (three) years (the warranty is provided by BPW); Maximum load on axle – 9.0 tons Steel chassis; Drum brakes; Level control valve; Double circuit brake system WABCO equipped with ТEBS system (2S/2M) with Roll Stability Support function. Automatic regulation of brake force and automatic brake shoes gap control; Pneumatic hand brake – of two axles; One test jack for each wheel – to measure and check pressure in braking system. The pressure in the braking system is automatically adjusted according to the load; Wheels and Tyres Solid wheels, tubeless tyres (6 wheels + 1 spare) - 7 pcs; Tyres 385/65 R22,5 - 7 pcs; Steel wheel disks 11,75x22,5 - 7 pcs; Aluminum fenders with brackets and mudguard - 2 pcs; Tank equipment Kingpin 2'' in diameter of international type of KZ brand with steel support plate; Double speed BPW supporting legs, 24 (50) tons load capacity, hand-driven; Manhole DN500 with a hinged lid and a gasket; Vent Valve on top of the tank for air intake and outlet -1 pce; Manhole safety fencing with a protective box; Ecological anti spill and draining equipment, 1 outlet at the tank manhole – draining system passing through it; Aluminum box of closed type for laying the discharge hose on top, on the right side, 4200 mm long - 1pce; Composite discharge hose L = 4,0 m., DN-100 (4” ) - 1 pce; Rear protection according to GOST R 50913-96 requirements; 2-rail side bumpers; Thermometer from 0° to + 300°C - 1 pce. Other equipment Fire extinguisher of 6 kg capacity with plastic box - 2 pcs.; Wheel blocks with brackets -2 pcs.; Box for nuetralizing agent (sand) -1 pce; Spare wheel mounting bracket on the right side in the center of the tank; The discharging equipment is situated in the rear side of the tank; Steel pipeline 4” for gravity discharge - 1 pce; Ball Valve with manual control DN100 (4”) heat-resistant on discharge pipeline - 1 pce. BottomValve for dark oil products 4" with manual control, steering wheel, on the right side -1 pce. Connection with plug Camlock 4" on the draining device; Discharge opportunities: discharging under gravity; Robotic painting; Tank painting - special treatment with zinc-enriched pre-coating and painting in one color with high-quality two-pack paint, flash drying (in compliance with the requirements of the Regulations concerning the carriage of dangerous goods); The colour of frame, consoles, supporting legs - orange; The tank colour - mirror-like; The color of outer bottoms - orange;

Engineer consultation

Our engineers will help you calculate the optimal load on the road according to the RF Government Regulation No. 12 dated 01.05.2015 for your cargo and your tractor for operation without overloading and fines.